Product Name: Amino-Modified Silicone Oil Emulsion
Chemical Family: Polysiloxane, Amino-Modified
Common Uses: Textile softening, lubricants, personal care, release agents
Manufacturer: Name, address, and contact number of supplier
Emergency Contact: 24-hour emergency telephone
Synonyms: Amino Silicone Emulsion, Polyaminopropyl Dimethylsiloxane Emulsion
Product Code: Manufacturer-specific identifier
Recommended Use Restrictions: Industrial applications only; not for food or pharmaceutical use
GHS Classification: Eye Irritation (Category 2B), Skin Irritation (Category 3), Non-flammable
Pictograms: Exclamation mark (if classified for irritation)
Signal Word: Warning
Hazard Statements: Causes mild skin irritation, may cause eye irritation on contact, not classified as hazardous for inhalation, low acute toxicity
Precautionary Statements: Wear protective gloves and eye protection, wash hands after handling, avoid contact with eyes and skin, use in a well-ventilated area
Routes of Exposure: Eyes, skin, ingestion, inhalation (mist)
Environmental Hazards: Not considered hazardous to the environment at recommended dilutions, but larger spills can present slip risk
Main Ingredient: Amino-Modified Siloxane Emulsion
Chemical Name: Aminopropyl terminated polydimethylsiloxane (CAS: 69430-94-0)
Content: 30–50%
Emulsifier Blend: Polyoxyethylene alkyl ether or equivalent, 1–5%
Deionized Water: 50–75%
Other Additives: Trace amounts of proprietary stabilizers or pH adjusters
Impurities: No hazardous impurities known under normal use
Eye Contact: Rinse immediately with plenty of water for several minutes, remove contacts if present, continue rinsing
Skin Contact: Wash with soap and plenty of water, remove contaminated clothing
Inhalation: Move to fresh air, seek medical attention if symptoms persist
Ingestion: Rinse mouth with water, do not induce vomiting, seek medical advice if large quantities swallowed
Symptoms: Mild irritation, redness, temporary discomfort
Medical Attention: Seek medical attention if adverse effects continue
Suitable Extinguishing Media: Water spray, foam, dry chemical, carbon dioxide
Unsuitable Media: High pressure water jet may spread emulsified liquids
Specific Hazards: Product itself is water-based and not easily flammable
Hazardous Combustion Products: Carbon oxides, silicon dioxide, nitrogen oxides, traces of formaldehyde possible under incomplete combustion
Protective Equipment for Firefighters: Standard firefighting equipment, self-contained breathing apparatus for enclosed spaces
Special Instructions: Cool containers exposed to fire with water spray, avoid exposure to fumes
Personal Precautions: Use personal protective equipment as indicated, avoid skin and eye contact, prevent slips
Environmental Precautions: Avoid entry into drains or waterways, contain with sand or soil
Clean Up Methods: Absorb spilled material with inert absorbent (sand, earth), collect for disposal, wash area with water to prevent residue buildup
Disposal: Follow local regulations, collect in properly labeled containers for waste handling
Reporting: Notify appropriate authorities for large or uncontrolled releases
Handling: Use in well-ventilated areas, avoid breathing vapors or mists, keep away from incompatible substances (strong acids, oxidizing agents)
Avoid Contact: Protect skin, eyes and clothing; do not ingest
Safe Work Practices: Wash hands after use, handle with care to prevent leaks or spills
Storage: Store in tightly closed containers, keep at temperatures between 5–30°C, avoid freezing or excess heat
Incompatibilities: Strong acids, strong bases, oxidizers; avoid moisture loss
Shelf Life: Consult supplier, typically one year in unopened original packaging
Storage Area Requirements: Cool, dry, well-ventilated area, keep containers upright and away from direct sunlight
Exposure Limits: No occupational exposure limits established for main component
Engineering Controls: Good general ventilation, local exhaust where mist may form
Personal Protection: Protective gloves (nitrile or neoprene), eye protection (safety goggles or face shield), protective clothing
Respiratory Protection: Not required under normal conditions, use approved respirator if mist concentrations exceed recommended thresholds
Hygiene Measures: Avoid eating, drinking, smoking during use, wash hands thoroughly after handling
Environmental Controls: Do not allow material to accumulate in drains or on work surfaces
Physical State: Milky white emulsion
Odor: Mild, characteristic
pH: 5.5–8.0 (as supplied)
Melting Point: Not applicable (liquid emulsion)
Boiling Point: ≥100°C
Flash Point: Not flammable, water-based
Evaporation Rate: Similar to water
Vapor Pressure: Comparable with water
Solubility in Water: Emulsifies to form stable dispersion
Density: 0.99–1.03 g/cm³
Viscosity: Moderate, varies by formulation (100–3000 cP)
Partition Coefficient: Not determined for mixtures
Decomposition Temperature: >150°C
Appearance: Homogenous, opaque white to off-white liquid, free from lumps or foreign material
Chemical Stability: Stable under recommended storage and use conditions
Reactivity: No dangerous reactions under normal use
Hazardous Reactions: None expected with normal industrial handling
Incompatible Materials: Strong acids, alkalis, strong oxidizers
Hazardous Decomposition Products: Possible oxides of carbon, nitrogen, silicon dioxide under extreme heat or fire
Conditions to Avoid: Freezing, heat above 40°C, contamination with incompatible substances, drying out of the emulsion
Acute Toxicity: Low oral, dermal, and inhalation toxicity expected based on available data
Skin Corrosion/Irritation: May cause mild irritation with prolonged or repeated contact
Serious Eye Damage/Irritation: Temporary irritation or redness possible
Respiratory Sensitization: No data suggesting sensitization via inhalation
Skin Sensitization: No expected risk of skin sensitization for most users
Germ Cell Mutagenicity: No data available to indicate mutagenic risk
Carcinogenicity: Not identified as carcinogenic by OSHA, IARC, NTP, or ACGIH
Reproductive Toxicity: No data suggesting reproductive risk
STOT - Single/Repeated Exposure: No adverse health effects anticipated under normal industrial use
Symptoms on Overexposure: Mild irritation; no chronic effects expected
Ecotoxicity: Low aquatic toxicity; not classified as hazardous to aquatic life
Persistence and Degradability: Siloxane components degrade slowly, surfactants degrade readily
Bioaccumulative Potential: Not likely to bioaccumulate significantly
Mobility in Soil: Emulsion can penetrate soil, but main component is partially retained by soil particles
Other Adverse Effects: At high concentrations, could create adverse physical effects (foaming, surface alteration) in water bodies
Regulatory Information: Not subject to special labeling regarding environmental impact in most jurisdictions
Waste Disposal Methods: Dispose of waste in accordance with local, regional, and national laws
Product Disposal: Can be incinerated or handled by qualified chemical waste facility
Container Disposal: Triple rinse and offer for recycling or disposal according to regulatory requirements
Avoid Release: Prevent from entering environment, watercourses, or drains
Recommended Treatment: Chemical or biological treatment can break down surfactant components
UN Number: Not regulated for transport
Proper Shipping Name: Non-hazardous substance
Transport Hazard Class: Not applicable
Packing Group: Not applicable
Marine Pollutant: Not classified as a marine pollutant
Special Precautions: Keep upright, avoid extremes of temperature, ensure containers are secure
Transport Labels: No special requirements
Safety Regulations: Complies with EU REACH, TSCA (US), DSL (Canada) where applicable for listed ingredients
Hazard Communication: Product does not meet requirement for hazardous classification under GHS for supplied uses
Labeling Requirements: Standard safety labeling, precautionary statements, product information on container
Other Regulations: Not scheduled as toxic or controlled substance under major chemical inventory lists
Reporting Obligations: Spills or accidental releases may require notification under CERCLA or local laws
Workplace Controls: Subject to standard occupational health and safety rules for chemical handling
